精选二四六天天资料

      Recycling FAQ
        contact us

        Do you know how to deal with the sewage discharged from the boiler?

        2019/1/21 16:26:38 Click:

        Do you know how to deal with the sewage discharged from the boiler?

        Before the sewage is discharged, the boiler water level is at the normal high water level, and the boiler pressure is performed at 0.1-0.2MPA. In accordance with the principle of "slow discharge, less discharge, and even discharge" (at least once a day), the operation is short and intermittent, that is, the sewage valve is closed after opening. , And then turn it on again, repeat this several times, and wait until the water level is at the normal low water level. Remember not to drain the boiler.
        Boiler pressure gauges, safety valves and other safety accessories should be regularly checked to ensure their reliability (pressure gauges should be at least once every six months and safety valves at least once a year).
        After the horizontal fuel (gas) boiler is continuously operated for 12 months, the smoke box door should be opened to clear the ash deposits in the furnace or the smoke pipe, and the cement in the smoke box should be inspected for peeling off, and the peeling part should be repaired.
        Remove and paint at least once a year the exposed rust of the base and other parts.
        Furnace shutdown maintenance Wet and dry maintenance. Among them, for boilers without human (head) holes or for a long period of time, the wet method should be used for maintenance. For boilers with human (head) holes or a long time out, Dry maintenance should be adopted. For specific operation methods, please refer to the “Boiler Instruction Manual”